Pinellas County PIU

Again the southbound signal at Haines Rd and 54th did not allow any travel this morning at 7:47 am. Stayed red for four cycles before those in front of me turned right. This happens periodically and is a real nuisance. Going on for years. I've reported it more than once. Coming back after dropping kids off it seemed to be ok but it needs attention please. Thanks

Light door open on top wires showing

The crosswalk #596 button to activate lights on the E side is not working.

Traveling both north and south bound on belcher On a few different occasions, the light has changed to green only long enough to let a 3-4 cars through before changing again Issues seems to be intermittent

This light creates a lot of traffic issues. The vast majority of the time this light turns red for 580, there isn’t even anyone there anymore trying to turn in/out of Sabal Springs because there are tons of opportunities to turn before the light changes. I drive through this light at least 4 times per day and hit the red 50% of the time, and usually there’s no one there at all (neither cars nor foot traffic), yet 100 cars on 580 have to come to a stop. The traffic flow is impacted by this too since it messes up the timing with surrounding lights. Can it be changed to exclusively be for foot/bike traffic from the trail? Cars can easily make the turn without the light by just waiting < 30 seconds.

Noticed the metal arm holding the lights was making the traffic lights appear to 'bounce'. This seemed odd since it's not like it's hurricane force winds today and didn't notice any other street lights doing this as we drove up East Lake road.

The north/southbound lights are cycling too quickly and it’s taking 3 cycles for 10 cars to get through this intersection from Haines Road. It’s causing a traffic jam.

signal for West bound 46th Ave N yellow light hanging open

I am a cyclist and unable to trigger the signal to change from red to green on 86th Ave when no cars are waiting. I have tried placing my bike on the right (curb) side of the sensor in both directions (east and west) but I'm unable to get it to trigger changing the light to green. Once a car approaches the intersection on 86th Ave, either behind or across 131st Street, the light will trigger. Please let me know if there is a different location on the sensor I should use or fix the sensitivity to allow for bikes to trigger the light. Thank you.

Blinking red

Every single day between 3-4pm it takes me 4-5 light rotations to get through this light and the light only stays green for five seconds. The light going on Belchet stays green five times as long with a car here and there it's absurd please adjust the timing there's three schools that get out and beach traffic and locals. Please help. It gets worse every day and nothing is done about it