Mô tả
Block walls under construction @ east & west side property lines, extending to sidewalk. Doubt there is a building permit, based on what is there.
1. Using gray precision block. Precision block not permitted in front yard setback unless stuccoed or veneered.
2. No pilaster footings. City code requires pilasters @ 8' O.C. max in front yard setback. Pilaster footings are 24" x 24" x 16" & require (4) #4 rebar vertical @ each pilaster, per city standard detail. Neither of these are in evidence.
3. Vertical rebar is #4 bars which are projecting approximately 5' above grade. CMC permits 3' max solid CMU wall in front yard setback, with balance of 5' max fence height to be decorative iron.
Please investigate permit status and guide the builder to construct his CMU walls in accordance with City of Corona standards.
7 Bình luậns
City of Corona (Chính thức đã xác nhận)
hmayfarth (Người dùng đã đăng ký)
LTaylor (Người dùng đã đăng ký)
LTaylor (Người dùng đã đăng ký)
hmayfarth (Người dùng đã đăng ký)
Horizontal rebar is in contact with earth. Not per code.
Code requires 3" cover @ subterranean reinforcing steel.
There are no dobies in the hole.
There is no way this steel could have passed city footing inspection.
Builder has poured footing this AM @ east side of property.
Đã đóng City of Corona Code Enforcement (Chính thức đã xác nhận)
Thank you for reporting this issue. Our Building Inspectors will be inspecting this property.
Your complaint will be closed in SeeClickFix. However, rest assured we will continue working with the responsible party until compliance is achieved.
It is prohibited to provide enforcement details regarding an open investigation of private property on public domains. Therefore, if you wish to obtain information on this issue, contact us directly at (951) 736-2250 or email at CodeEnf@CoronaCA.gov, and we will put you in contact with the building inspector investigating this report. Once again, thank you for engaging with us through See Click Fix.
hmayfarth (Người dùng đã đăng ký)