Thank you for your post. We are currently investigating this concern.

Work Order Completed -

I asked to have the Englewood drive sign turned 180 degrees, in order to see it when driving on Judwin. The DOT did not rotate the street sign instead they added a new sign for Judwin and closed the ticket. This did not help or fix the problem. I started this effort for street sign in 2015 and seven years later it's still not right.

This issue should be reopened!

Hi Robert,

I'm going to be totally honest with you. I hope it helps. I'm pretty good at reviewing reported issues and reading between the lines to be able to decipher issues that are vaguely described.

With this issue, I'm still dumbfounded. What do you mean by "turned 180 degrees"? If the Englewood sign is turned 180 degrees, it would be even less visible to traffic than it is now.

Is it possible you're asking to have the Englewood sign put on the other side of the street so that cars traveling west on Judwin Avenue can see it before passing Englewood Drive?

Also, I'm sure you're aware there are two separate intersections where Judwin Avenue & Englewood Drive meet, right? To which intersection are you referring?

If you're going to report this issue again, please be as descriptive as possible, so that it would be impossible for anyone to not understand exactly what you're requesting.

By the way, it would be very helpful if you could be accurate with the geolocation address. There is no intersection at 37 Englewood Drive.

I hope this information helps.

Tommy,

DOT knows where the sign is located, they have been there twice. However, i did miss speak the sign should be turned 90 degrees. This way drivers can see it. I see what they are trying to do with the new sign, but it wasn't done properly.

If you work for DOT or can help in some way, then please do.